Finland Type Approval for Taps and Water Supply Systems
According to the law of Finland, the manufacturer should demonstrate that the construction product meets the set requirements. Type Approval is the simplest way to demonstrate conformity.
Rubber, adhesives and coatings
Natural and synthetic materials and components such as rubber, adhesives and coatings are used in water supply networks. Design, performance and health requirements for these products are described in national and international regulations and standards, ensuring the availability of safe (drinking) water.
Kiwa facilitates an extensive portfolio of approval and testing services for products such as seals, rings and gaskets, thermoplastic elastomers, adhesives and lubricants, protective coatings and lining material, fenders and bearings.
Inspection for Construction Product Certificates and Approvals
Safeguard approved construction products continue measuring up to the requirements with inspection by an independent inspection body. Kiwa Sverige AB is accepted in Denmark, Finland, Norway and Sweden for conducting inspection for; GDV, SINTEF, STF and VA...
ISO 22301 Business continuity management systems
ISO 22301 Business continuity management system with Kiwa: Prepare for disaster, disaster, and accident-related business disruptions.
ISO 50001 Energy Management
ISO 50001 Energy Management system certification with Kiwa: conserve resources, save money and mitigate climate change.
ISO 9001 Quality Management
ISO 9001 Quality Management Systems Certification with Kiwa: improve your performance, meet customers’ needs and increase your profit.
Kiwa UK Water Regulation 4 Testing and Certification (KUKreg4)
Kiwa Watertec | Sanitary and Plumbing Regulation 4 Testing and Certification (KUKreg4)
Sweden Type Approval for taps and water supply systems
Type approval for taps and water supply systems is the easiest way to indicate conformity of construction products with regulatory requirements in Sweden. The approval also indicates suitability for the application.
ISO 14001 Environmental Management
This year, ISO 14001 The International Standard for Environmental Management Systems will be revised. The new edition, ISO 14001:2026, is expected to be published in early 2026 (between January and April 2026, with most sources anticipating March to April...
Ü-mark – German High-Quality Mark for Construction Products
The Ü-mark indicates the usability of a construction product in Germany according to national requirements which are not covered by CE marking.
Ensure CE Compliance for Pressure Equipment with Kiwa
Kiwa offers an assessment of pressure equipment manufactured for the European market according to PED 2014/68/EU.
DVGW Testing and Inspection
Testing and inspection for water and gas materials, components and products in accordance with various German DVGW evaluation guidelines to promote safety, hygiene and innovation – for the benefit of the environment and consumers.
Kiwa Watermark Certification, Testing and Inspection
Tests and Kiwa Watermark certification guarantee compliance with the requirements of Dutch standards for products in contact with drinking water used in industrial and domestic drinking water installations.
KOMO Certification and Testing
Tests and KOMO certification guarantee compliance with the requirements of Dutch standards for products for the building and infrastructure sector.
WRAS Testing and Approval
Kiwa Watertec | WRAS - Water Regulations Advisory Scheme Testing
Certification of vulcanised rubber products for cold & hot non-drinking water applications -BRL 2013
Certification of vulcanised rubber products for non-drinking water applications (BRL 2013)
Guidance to OWWSC approval for manufacturer & vender by Kiwa
OWWSC approval is applicable to all manufactures and suppliers of water supply components and materials that are used in the production and distribution networks in Sultanate of Oman. Kiwa can supports this compliance process by providing testing and insp...
Kiwa NSF/ANSI/CAN 372 Product certificate for drinking water system components – Lead content
Most North American and Canadian governmental agencies that regulate drinking water supplies require that water treatment or distribution products comply with NSF/ANSI/CAN 372: Drinking water system components – Lead content.
Kiwa UNI Testing and Certification
The KIWA-UNI mark certifies the conformity of plastic and metal components in contact with water and gas to national and international standards.
NSF/ANSI/CAN 61 Product Certificate for Drinking Water System Components
Nearly all U.S. states and Canadian provinces/territories require that components of drinking water distribution systems comply with and/or be certified to the NSF/ANSI/CAN 61 standard. This standard sets minimum criteria for evaluating the health effects...
UBA – German Evaluation Criteria for Products and Materials in Contact with Drinking Water
In Germany, plastic products of all kinds as well as rubber products that come into contact with drinking water must meet the hygienic and toxicological requirements of the guidelines of the Federal Environment Agency test (UBA). This is described in the ...
Contact us
Fill out the contact form to receive information about Kiwa services or to request a custom quote.