Thermostatic regulating valves (BRL-K14003)The thermostatic regulating valves are intended to be used in circulation systems in tap water installations, with a maximum operating pressure of 1000 kPa and a maximum water temperature of 90°C.
NSF/ANSI/CAN 61 Product Certificate for Drinking Water System ComponentsNearly all U.S. states and Canadian provinces/territories require that components of drinking water distribution systems comply with and/or be certified to the NSF/ANSI/CAN 61 standard. This standard sets minimum criteria for evaluating the health effects...
Kiwa NSF/ANSI/CAN 60 product certificate for drinking water treatment chemicals — Health effectsNSF/ANSI/CAN 60 is the American National Standard for evaluation of water treatment chemicals and is required by regulation or law in most U.S. states and Canadian provinces/territories. This Standard establishes minimum health effects requirements for th...
Kiwa NSF/ANSI/CAN 372 Product certificate for drinking water system components – Lead contentMost North American and Canadian governmental agencies that regulate drinking water supplies require that water treatment or distribution products comply with NSF/ANSI/CAN 372: Drinking water system components – Lead content.
External coatings for the corrosion protection of buried or immersed pipelines and jointsExternal coatings for the corrosion protection of buried or immersed pipelines and joints AR 87
Inspection and Certification Sprinkler SystemsKiwa FSS inspects sprinkler protection. Sprinkler systems are reliable fire control systems. A sprinkler system must detect, signal and control a starting fire. In many cases the fire will be extinguished by a few sprinklers.
Coating systems for drinking water applications (BRL-K759)The Evaluation Guideline applies to coatings, produced in a dry form such as powder or in a liquid form such as paint, for protection against corrosion of metal attachments, piping, valves, pumps, tanks, pressure vessels and similar, for drinking-...
Closing accessories for drinking water transport and -distribution systemsThe products are intended for use, above and below ground, in drinking water transport and drinking water distributions system supply lines intended for human consumption. This evaluation guideline specifies the minimum requirements for design, functional...
Test laboratory Sanitary AppliancesKiwa makes quality visible As a supplier, buyer, inspector and consumer you need and want confidence. Confidence in the quality of materials and products used in (drinking) water installations and in its manufacturing. Kiwa will make the quality o...
Compression fittings to tighten with matching clamping device (BRL-K774)Compression fittings clamping device
Kiwa FSS Testing: test lab for sprinklersSprinkler systems have proven to be a reliable fire-protection system for many years. However, many of these systems are showing their age and it is not uncommon to find sprinkler systems that were installed 25 or more years ago. The sprinklers in these s...
DIN CERTCO Approval, Testing and InspectionKiwa is a recognized laboratory by DIN CERTCO to provide testing and inspections services plastics piping systems for heating systems materials.
Worldwide Co-operation and Services for Drinking Water AppliancesYour local Kiwa office also has extensive knowledge of international standards and market developments to offer various services regarding the certification of your products in various countries.
Water reducing valves and combination water pressure reducing valves (BRL-K14004)This evaluation guideline specifies the requirements for water reducing valves and combination water pressure reducing valves of nominal size DN 8 to DN 100 for inlet pressures that not exceed 1.600 kPa and a temperature that does not exceed 30°C ...
Water quality marks: Middle EastIn the Middle East, products utilized in the water sector need to demonstrate proof of toxicological assessment of their impact on the quality of water. Kiwa certification, testing and inspection services are fully accredited and recognized by local autho...
Underground and Pillar hydrants (CPR)This certificate of constancy of performance includes both the underground fire hydrants as the pillar hydrants that are intended for firefighting purposes.
Solar PV modules testing and certificationKiwa operates an internationally recognized certification scheme for Solar PV modules (crystalline and thin film). This is the Kiwa Quality Approval. We use our accredited laboratory facilities to test PV modules according to IEC 61730 for safety and IEC ...
Services Australia and New ZealandActivities for Australia and New Zealand-vKiwa and SAI Global have built up for many years an extensive co-operation in the field of sanitary products. Our laboratory is recognized by SAI Global, Global Mark, IAPMO Oceana and AGA for conducting tests acco...
Rubber materials and products - Services and solutionsSealing, damping and protecting: that’s what rubber materials are used for in utility installations, building constructions and infrastructure.
Plastics piping systems - Certification and testingPlastic pipes and fitting | Quality by certification and testing