Inspection Foam Extinguishing Protection - Foam Extinguishing System
Receive a quote tailored to your needs
As an experienced partner in fire safety, Kiwa FSS applies a comprehensive approach to all relevant aspects of your foam extinguishing protection during a Foam Extinguishing System Inspection.
A foam extinguishing system is the most widely used fire protection system in storage facilities for flammable, toxic, caustic or other hazardous goods (as defined in the PGS 15 guideline). This could be either a small pesticides storage facility or large oil tanks on refineries. In addition to fire protection, safeguarding people and environment is an important objective of such systems. Foam concentrate is added to fire extinguishing water. Systems are defined as a light, medium or heavy foam system depending on the type of foam concentrate.
Fire Compartment
All spaces protected by a foam extinguishing system in a building structure shall be a fire compartment. Structural requirements apply to these spaces. Therefore, in addition to system operation Kiwa FSS also assesses structural details and organizational provisions associated with a foam extinguishing system during a Foam Extinguishing Protection Inspection.
In short: Kiwa FSS identifies and inspects all aspects essential for effective foam extinguishing system operation. Kiwa FSS inspections are based on both the CCV inspection schemes as compliance with standards. Kiwa FSS also conducts random inspections for certification bodies.
Why Kiwa Fire Safety & Security?
Kiwa Fire Safety & Security (Kiwa FSS) is a leading testing, inspection and certification (TIC) company, focusing on products, installations and companies in the field of fire and burglary protection. Kiwa FSS provides services in an expert, flexible, customer-oriented and innovative manner. These services include conducting inspections, certifying (fire) security companies, testing products and providing training from a fully independent, objective and integral position.
Your Inspection Conducted by Kiwa FSS Inspection
Read below which steps the inspection process consists of, up to and including the issuance of the inspection certificate.
Request for an Inspection
Would you like your (fire protection) system to be inspected by Kiwa FSS Inspection? If so, please contact us.
Quotation Acceptance
You will receive a quotation outlining the agreements and conditions applicable to the inspection. Once the signed quotation has been returned, the inspection process will be initiated.
Inspection Scheduling
After the quotation has been signed by both parties, the Kiwa FSS Planning Department will contact you to schedule the inspection. Following the appointment, you will receive a confirmation containing the details of the planned inspection.
Inspection Execution and Reporting
During the inspection, it will be determined whether the fire protection system complies with the applicable requirements. After completion of the inspection, the inspector records the findings and any non-conformities in an inspection report.
Review of the Inspection Report
The inspection report and its conclusion are subsequently reviewed to ensure the completeness, accuracy, and consistency of the assessment.
Non-Conformities and Corrective Actions
If deficiencies are identified, appropriate corrective actions must be implemented. These actions must be documented and supported with the necessary evidence, which is submitted to the inspector for review. Once the deficiencies have been resolved, the inspector will assess whether they can be closed. This assessment may be carried out administratively or through a re-inspection.
Decision on the Issuance of the Inspection Certificate
If the inspection results in a positive conclusion, an inspection certificate will be granted.
Issuance of the Inspection Certificate
Following a positive certification decision, the organization will receive the inspection report together with the corresponding inspection certificate.
Internal Inspection of Sprinkler System Piping
An automatic sprinkler system must have a reliable pipe system for optimal operation. An internal Inspection of Sprinkler System Piping will give you an insight into the current condition of your sprinkler system.
Inspection and Certification Water Mist Systems
Kiwa FSS has a lot of experience inspecting and certifying water mist protection systems, based on both the CCV inspection schemes as compliance with standards. Kiwa FSS also conducts random inspections for certification bodies.
Air Permeability Test Reporting
Gaseous fire extinguishing systems are often used as a fire protection system. As a fire safety expert, Kiwa FSS can measure the air permeability of a room and thus determine the effectiveness of the extinguishing system.
Quick scan Fire Safety in Buildings
Kiwa FSS’s quick scan Fire Safety in Buildings is an independent investigation to determine the current status of fire safety precautions.
Inspection PGS 15 Publicatie reeks Gevaarlijke Stoffen (Publication Series on Hazardous Substances)
Guideline 15 from the Publication Series on Hazardous Substances (PGS) contains guidance for the storage of packaged hazardous goods. Kiwa FSS can assess the fire safety aspects in your storage facility during an inspection PGS 15, including from baseline inspection to PGS 15 certification and follow-up inspection.
Inspection Fire alarm and Evacuation Alarm Systems
In case of fire, fire alarm and evacuation alarm systems are crucial for the safety of occupants in a building and minimising damage. Kiwa FSS is the expert for inspection and certification of fire alarm systems and evacuation alarm systems, see here for more information!
Inspection CO/LPG Detection System
Standard (operating) conditions in motor vehicles parkings and storage garages can create an unsafe environment for occupants due to exhaust fumes or leaks. Carbon monoxide (CO) and LPG detection is one of the measures that can contribute to a safe environment for occupants.
Inspection Emergency Lighting
During an Emergency Lighting Inspection, Kiwa assesses the basic assumptions for the emergency lighting as well as the design data to determine that emergency lighting meets the objective.
Inspection Smoke Control Systems (RCS)
Smoke control systems (RBS) must create a smoke-free egress route for the building’s occupants. Because regulations and unambiguous basic assumptions are largely not available, it is important to work with partners with sufficient knowledge. Kiwa is such an expert partner.
Inspection Gaseous Fire Extinguishing System
Kiwa FSS inspects gaseous fire extinguishing systems based on the CCV inspection schemes and compliance with standards; prevent fire damage to computer and other equipment! If you want to know more about inspection of an extinguishing gas system, click here.
